Landee Pipe Fitting is committed to manufacturing of Piping Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc. Our mission is to improve the flow control ability of oil, gas, water, steam, acid liquid and other fluid.
Name: G10 Insulating Gasket, 6 Inch, Class 300, ASME B16.21. Type: Insulation Gasket. Material: G10 + PTFE. Size: 6 Inch. Class: 300 LB.
Abstract Using DEFORM-3D finite element forming analysis software to conduct a numerical simulation on the hot forming of the pipe cap, and the optimal heating temperature and size of the hot for...
Name: ANSI B36.10 Pipe Nipple, 1/2 Inch, ASTM A106 GR.B, SCH 160. Type: Pipe Nipple. Material: ASTM A106 GR.B. Size: 1/2 Inch X 100 mm. Pressure: SCH 160. End: NPT*POE.
The elbow is a common component in the piping system, and its main function is to change the direction of the pipe. Therefore, the elbow plays an important role in pipeline construction. There ar...
Name: Butt Weld 90 Degree Elbow, SCH 40, LR, 6 Inch, ASTM A234 WPB. Type: Elbow 90 Degree LR. Material: ASTM A234 WPB. Size: 6 Inch. W.T: SCH 40. End Connect: Butt Weld.
There are many dos and don'ts for installing the elbow. Because the elbow is directly connected with the straight pipe, leakage will occur if you are not careful enough to install the pi...
Product Name: ASME B16.49 45 DEG Bend, 5D, 6 Inch, SCH XS, API 5L X65 PSL2, HOT Induction Bends, BW. Size: 6 INCH. THICKNESS: SCH XS. Material: API5L X65 PSL2. Surface: BLACK PAINTING.
1. The thin-walled stainless steel press fitting should be handled with care, and should not be thrown or trampled during construction. 2. Stainless steel press fittings shou...
Product Name: ASTM F2329 Stud Bolts & Nuts, HDG, 485 MM, Hot-dip Galvanization. Standard: ASTM F2329. Size: 2-1/4 Inch. Material: ASME A193 B7, ASTM A194 2H, HDG. Length: 485 MM. Surface: HOT-DIP ...
As the name describes, stainless steel pipe fittings are made from stainless steel. They include stainless steel elbows, tees, crosses, reducers and pipe caps. According to th...