Orbinox UK Knife Gate Valves (Water Valves)
EX (SER.10) – Unidirectional
The EX model knife gate is a uni-directional wafer valve (one way water valve) designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
- Pulp and Paper
- Power plants
- Wastewater treatment plants
- Chemical plants
- Food and Beverage
- Bulk handling
- Mining
- etc.
EK – Unidirectional High Performance
The EK model knife gate is a uni-directional wafer valve (one way water valve) designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
- Pulp and Paper
- Power plants
- Wastewater treatment plants
- Chemical plants
- Food and Beverage
- Bulk handling
- Mining
- etc.
ET (SER.20) – Unidirectional
The ET model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI-TIS 405 for industrial service applications.
The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
- Pulp and Paper
- Power plants
- Mining
- Chemical plants
- Wastewater
- Food and Beverage
- etc.
EB (SER.11) – Bidirectional
The EB model knife gate is a bi-directional valve (two way water valve) designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
- Wastewater treatment plants
- Chemical plants
- Food and Beverage
- etc.
BT (SER.22) – Bidirectional
The BT model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and seat assures non-clogging shut off on suspended solids in industries such as:
- Pulp and Paper
- Power plants
- Mining
- Chemical plants
- Wastewater
- Food and Beverage
- etc.
HB – Bidirectional
The HB model knife gate is a bi-directional valve (two way water valve) designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
- Wastewater treatment plants
- Chemical plants
- Food and Beverage
- etc.
TL (SER.30) – Through Conduit
The TL model knife gate is a through conduit wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or reverse flow. The valve is used in a wide range of demanding applications in industries such as:
- Pulp & Paper
- Wastewater Treatment Plants
- Power Plants
- Chemical plants
- etc.
TK – Through Conduit High Performance
The TK model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or reverse flow. The valve is used in a wide range of demanding applications in industries such as:
- Pulp & Paper
- Wastewater Treatment
- Power
- Chemical
- etc.
TH – Through Conduit High Pressure
The TH model knife gate is a through conduit high pressure wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or reverse flow. The valve is used in a wide range of demanding applications in industries such as:
- Pulp & Paper
- Wastewater Treatment Plants
- Power Plants
- Chemical plants
- etc.
CR (SER.70) – Round and Square Port
The CR model knife gate is a heavy duty valve designed for handling difficult applications.
The CR model is suitable for use in recycle applications, like junk or sand traps of pulpers, high consistency cleaners… or as silo outlet with solid material.
The two piece body with round inlet and square outlet (larger than the inlet) assures non-jamming.
DT (SER.80) – Double Gate
The DT model knife gate is double gate valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or contaminated media.
In open position, both gates retract into the body and allow full flow. When closing, the gates push stock and contaminants as staples, wires out of the body into the flow. Stroke time is the half of conventional valves.
All components subject to wear are replaceable.
VG (SER.61) – Slurry Valve
The VG model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve body and the two rubber sleeves makes the VG valve suited for use in handling abrasive slurries in industries such as:
- Mining
- Power plants
- Chemical plants
- Wastewater treatment
- etc.
XC (SER.14) – Hopper Shape Silo Outlet
The XC model knife gate is a wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the body allows for easy passage of the fluid and makes it ideal for use as silo outlet valve. Widely used in industries such as:
- Power plants
- Food and Beverage
- Chemical plants
- Mining
- Etc.
The valve is normally installed in the reverse position (seat upstream) in order to avoid problems like build-up in valve body, seat wear, difficult closing.
BC (SER.90) – Square Port
The BC model knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications in industries such as:
- Chemical plants
- Wastewater treatment Plants
- Power plants
- Mining
- Food and Beverage
- etc.
BX – Coal Burner Isolation (ATEX Cat.1)
The BX model knife gate is a bi-directional wafer valve specifically designed for the isolation of pulverized coal burner lines on coal fired boilers during maintenance. The valve is dust tight which makes it suitable for other bulk handling applications, such as silo outlet valves.
The BX valve has been designed for use in potentially explosive areas (ATEX) and it complies with DIN EN 14460 (Explosion resistant equipment). In the closed position, the valve can be used as an effective measure against flame propagation in the event of an explosion.
AT – Unidirectional Split Body)
Cast or fabricated construction and precise gate guiding inside the body make this valve a perfect choice for demanding applications (transport of very heavy fluids, food industry).
VP – Bidirectional Split Body)
The cast construction, bidirectional design and precise gate guiding inside the body result in a valve meeting the requirements of demanding applications (transport of very heavy fluids, food industry).
KP – Transmitter Isolation)
Orbinox KP valve provides isolation of an instrument level transmitter from a storage tank. Installation of this valve allows for transmitter replacement or maintenance without disruption of the process or draining of the vessel.